Put together very well. Extra 2 antennas 4-plug to 2-plug included. Screws for both 75 mm frame and 65mm frame. Picture quality is great. Plug and play. No need to find a canopy that fits. I have purchased 5 of them.
Very creat Aio cam. Buy the new 300 mah 1 S HV betafpv / GNB batterys and you have on 100mW vtx power the same flight time as on 25 mW vtx power with 260 mah batterys. For this money the best, i am pretty sure. A perfect upgrade for us / uk 65 and uruav65. Here is another review : https://www.youtube.com/watch?v=jkHrku6OxWg
By Tim Bain
August 31, 2018
Great little cam/DVR with a good field of view and a reasonable price +fast delivery as always
By Javier Onis Gorgojo
June 06, 2018
The best thing about this fpv camera is that it comes completely assembled in its canopy, just plug and play. Its total weight is less than 6grm and it has a clarity and great image quality for its price. It also includes two spare pig-tail antennas and screws to mount your canopy in different drones.
Your canopy has a button to change your channels very easily. The only downside is that its angle of the camera is fixed, about 10 degrees.
By Riley Shiery
May 22, 2018
This cam is my #1 Choice, I LOVE the modularity and it works well with the Printed TPU low-profile camera mounts I use on all my whoops.
I am an expert at breaking RC models, I have been doing it for the past 19 years, and I seem to burn through VTXs and Cams about as fast as I go through brushed motors on my whoops. These last as long or longer than Crazypony, Inductrix, or any other camera I've used, and when a crash breaks a camera or a VTX it takes me less than a minute to swap out another and get back to flying.
It has taken me a while to find a camera/vtx that I like so much and I hope to continue buying these for all my whoops for as long as boldclash will keep selling them.
By Thomas Linke
May 18, 2018
Tolle Kamera! Sehr gutes Bild. Der Empfang könnte nicht besser sein. Ich bin rundum zufrieden
By Tim Bain
May 13, 2018
Very nice cam/canopy combo and very fast service to the UK
By Daniel Ewing
April 30, 2018
Excellent picture quality, better than my other AIO cams. Soldered the 4 pin jst to my beecore v2, screwed down the canopy/cam to my tiny 7, all the holes lined up perfectly. It's really nice having a cam with canopy that didn't require glue, tape or rubber bands! And it's really straight and doesn't move, i love it! Worth every dollar.
By Alexandre Leblanc
April 27, 2018
Great combo that look awesome, just order another one with some 19000kv motors.
By Tim Bain
April 23, 2018
Great little camera/canopy and a very quick delivery time,so good I am just about to order another one
By Randy Kralka
April 16, 2018
This little camera is something that micro whoop quadcopter builders can wish. It is covered by light plastic canopy, low and light, but sturdy enough to protect camera and antenna from usual bashing against things and from dirt getting in.
By Eddie Ramos
April 07, 2018
Very beautiful modeled canopy. The image quality of the camera is perfect. only request to make it a little lighter. And when you connect to the existing connector of B03pro, the distance to the foundation is close, so it will be short-circuited. Devices are necessary. Great camera canopy. Fits perfectly B03pro.
By Geraldine Hash
April 01, 2018
The camera works great, and ups the bar on coordination of eye, hand, and brain. Great canopy, super durable, VTX works great, camera could be better, but still great overall product. I use it daily on 5 different Whoop style drones.
By christal garcia
March 25, 2018
Kinda big to fly around through the house though. Read reviews and saw this canopy/camera setup and thought it would be the way to go, as it protects the camera too. This little camera is great. Hooked it up to my B03 Pro in just a couple minutes. It plugs right in on the board of the quad. Just use the far right two pins to plug it into. Have to bump the quad up to higher setting with the extra weight, but it still flies great, best of my "ducted" quads by far . . . and now, it has an FPV camera. Whoop!
By bryan smyth
March 14, 2018
This is a beginner's camera, suitable for Bwhoop B03 pro,B03, B06, Inductrix, E011,TINY7 / 5.5g. Bought this camera to fly FPV with my Boldclash B03 Altitude drones. I've done several flights with mine over a week's time, and am only now getting some control.
By Stanislaw Trzesien
February 18, 2018
Très bon rapport qualité/prix, il y a même des antennes de rechange dans la boîte!;-) Dommage que le vtx n'est pas de trous de fixation permettant de l'adapter à la canopy du B06.
Si vous envisager ce montage je vous conseil d'acheter directement le bundle canopy/caméra disponible sur le site.
Autre point très positif, le temps de livraison est un record, 7 jours entre l'envois depuis la Chine et la réception en France. Je crois avoir trouvé mon nouveau shop chinois favori :-)