Sorry, the item is not on the range of the shipping area. Please Sign In and Complete Your Shipping Address. Contact us if any problem.
to the airline's restrictions, the battery can not be shipped in the
near future. Only for our Chinese warehous, the U.S warehouse in shipping normally. In order to fully experience the fun of products, it's
recommended that you can buy the 3* Batteries Version or Battery Charger Set directly.
our B03 pro's battery was upgraded from 260mAh (original B 03's
battery) to 300mAh when it released, but the coding and labeling didn’t
keep up with it at that time. So the codes and labeling are still 260mAh
now, and we apologize for our mistakes, we will correct it in the next
batch. Notice is hereby given.
Here are theCustomer Test Review and Test Videos:
BWhoop B03 Pro's 300mAh battery Capacity Test (We suggested to set safe discharge voltage to 3.7V.)It shows like:4.2V-3.0V: Discharge 315mAh.
Actually our B03 pro's 260mAh (labeling and coding all wrong before 2017/11/27) is same capacity as the 300mAh (coding wrong before 2017/11/27, labeling right).
Battery Charger： Portable indoor & outdoor
charging Charge universal 1S battery 6 battery packs at Once LiPo
(4.2V) / LiHv (4.35V) each port Support USB 5V/2.1A interface Intelligent
Battery Charger： 1. DC XT60
port and DC005 9-17V provides outdoor and indoor two input charge modes 2.
Six ports to charge separately, each varies from 0.1-1A 3. Each port set LiPo
(4.2V) or LiHv (4.35V) separately 4. Four kinds of battery connectors in each
port for 1S battery Micro PH2.0, MX PH1.25, mCPX 5.PH2.0, JST (convertor) 5.
LED and buzzer indicate charging status provides more safety charging tips to
protect battery 6. USB port (5V/2.1A) for charging iPhone, mobile phones,
digital cameras, etc. 7. Maximum protection: battery reverse polarity
protection, battery over voltage protection and DC input voltage
protection Battery： 1. Lithium battery for BoldClash BWhoop B03 Pro, B03,
E011 2. Lightweight, durable, practical and convenient to use 3. It has
longer endurable working time than ordinary battery 4. Provide your RC device
with continuous power for smooth and normal performance 5. High capacity and
long life span
Battery Charger： 1. DC Input
Voltage: 9.0V - 17.0V 2. Charge Power Max.: 4.35W x6, ±10% 3. Charge
Current: (0.1 - 1.0A) x6, ±10% 4. Battery Type: Lipo/LiHV 5. Battery Cell
Count: 1cell 6. Indication: LED light & Buzzer 7. Support Battery
Port: Micro, MX, mCPX, JST(convertor) 8. Support USB Charge Port:
5V/2.0A 9. Net Weight: 67g 10. Dimensions: 100 x 50 x
22mm Battery： 1. Brand: BoldClash 2. Model: BWhoop B-03 Pro-01 3.
Suitable for: BWhoop B03 Pro, B03, E011 4. Capacity: 300mAh 5. C Rate:
35C/70C 6. Voltage: 3.7V 7. Number of Cell: 1 Cell 8. Battery Type:
Lithium / Lipo Battery 9. Plug Type: MCPX, Male 10. Dimensions: (1.26 x
0.67 x 0.35)" / (3.2 x 1.7 x 0.9)cm (L x W x H) 11. Weight: 0.31oz /
1 x Charger 5 x Battery 1 x
TX Male to XT60 Male 3 x Micro to JST 1 x Battery Ribbo
Any power supply that is similar to B6 RC airplane charger is available to our charger. Our charger uses DC005, with 7-17V/40W input.
Q1:What is the input current for P01 ?
input current：around 2.6-4.5A.
Q2:How to maintain and charge lipo battery in a most proper way?
A2:Dear customer, Please refer to the following:
1. Not charge the battery immediately after using. Let the battery rest for 5 minutes before charging.
2. Do not reverse the positive and negative pole. Ensure the connection is in place and prevent the battery from burning out caused by short circuit.
3. If the battery is expanded, you should replace a new one. Otherwise, it’s easy to cause an explosion.
4. Use voltage buzzer to test the voltage.
If the battery is 3.6V voltage, it shows that it is in the state of over discharge, which is easy to be damaged.
When the battery is not used for a long time, it’s advisable to keep the voltage at 3.8V/ cell.