The Boldclash F02 AIO Separated Type 5.8GHz 48CH 25mW A/V Camera & TX Support 2.9V-5.5V NTSC/PAL for Tiny Whoop FPV Inductrix is tailored for your favorite Tiny Whoop Inductrix, designed to offer high performance FPV piloting and aerial photography. High-grade image sensor captures crisp, clear flight footages with stunning details. Wide-angle lens covers a broad range for a better view. Separated transmitter module has 48 channels and supports touch switch to select channel frequency group. LED indicators tell channel, frequency group information, PAL/NTSC and FLIP information.
Wide-angle lens covers a broad range for a better view.
Separated transmitter module.
48 channels, support touch switch to select channel frequency group.
NTSC/PAL support Switch, support vertical inverted image switch.
8-LED display channel and 6-LED display frequency group information.
1-LED display PAL/NTSC and FLIP information.
Miniature and lightweight design.
Temperature: -10 ~ +60℃
Ambient Temperature: 25℃
Frequency Band: 5730~5870MHz
Channel Customer: 8
Modulation Type: FM
Peak Deviation MAX.: 6MHZ
Channel SEL.: Touch Switch/PWM
Transmit Power: 13±1dBm(25℃)
Frequency Control: PLL
All Harmonic Max : -50dBm
Frequency Stability: 100KHz
Frequency Precision: 200KHz
Channel Carrier Error: 1dB
Antenna Port: 50Ohms
Input Format: NTSC/PAL
Sensor PAL: 720X540/NTSC:640X4801/4
Lens Angel: H:120/V:100
Base-band Interface: 2X2.0 WITH PAD
Power Consumption: 195-210-Ma@5V DCIN
Supply Voltage: 2.9V-5.5V
Operating Temperature: -10~+60℃
Dimensions: (0.79 x 0.59 x 0.20)" / (2 x 1.5 x 0.5)cm (L x W x H)
1 x Boldclash F02 AIO Camera & VTX FPV
1 x Antennas
1 x Manual
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. VRC Hobbies Inc. cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
This cam is my #1 Choice, I LOVE the modularity and it works well with the Printed TPU low-profile camera mounts I use on all my whoops.
I am an expert at breaking RC models, I have been doing it for the past 19 years, and I seem to burn through VTXs and Cams about as fast as I go through brushed motors on my whoops. These last as long or longer than Crazypony, Inductrix, or any other camera I've used, and when a crash breaks a camera or a VTX it takes me less than a minute to swap out another and get back to flying.
It has taken me a while to find a camera/vtx that I like so much and I hope to continue buying these for all my whoops for as long as boldclash will keep selling them.
by Stanislaw Trzesien on February 18, 2018
Très bon rapport qualité/prix, il y a même des antennes de rechange dans la boîte!;-) Dommage que le vtx n'est pas de trous de fixation permettant de l'adapter à la canopy du B06.
Si vous envisager ce montage je vous conseil d'acheter directement le bundle canopy/caméra disponible sur le site.
Autre point très positif, le temps de livraison est un record, 7 jours entre l'envois depuis la Chine et la réception en France. Je crois avoir trouvé mon nouveau shop chinois favori :-)
by kevin wells on January 26, 2018
i love this little cam it has a good video quality and range is good too