The BoldClash BWHOOP B03 Pro 716 Motor 61500rpm EDF RC Quadcopter 260mAh 3.7V is surely your ideal companion! This quadcopter boasts rich and powerful functions, such as 3D roller, headless mode, one-key auto return and so on. It comes with remote controller for high-sensitive operation. Built with 260mAh lithium battery, this quadcopter ensures minutes flight time. It is quite easy and fun to play with. How can you miss it out?
Lightweight and mini size, easy to carry it.
fully assembled quadcopter, make more possibilities and fun play value.
Uses a Plug-in system for easy motor repalcement in case of repair or upgrade.
7x16mm 61500rpm direct-driven motor provide strong power.
Quite EDF power system and durable rotor protection design provide more safer experience.
①Owing to the airline's restrictions, the battery can not be shipped in the near future. Only for our Chinese warehous, the U.S warehouse in shipping normally. In order to fully experience the fun of products, it's recommended that you can buy the 3* batteries version directly. ②The process of flash has a certain risk. Owing to the difference of personal technical ability, we are not responsible for the damage caused by failure of flash.
Q1: How to solve the problem of the aircraft is spinning on the ground or can't fly?
A1: Dear customer, If the aircraft is spinning on the ground or can't fly, you can take the following video to lock problems and then solve it.
Verify the video operation:
1. Bind the aircraft and the remote controller
2. Put your hands on the low side of the aircraft, such as the battery holder, which can grasp it safely and firmly.
3. Push the accelerator slightly
4. Observe the condition of the motor and propellers, shoot video slowly and clearly.
If there is a lot of foreign objects between the blade and motor, you need to clean it and try again.
If the motor can't move, the motor may be damaged and needs to be replaced.
If the blade has been badly damaged, you need to replace it.
If there is any other situation, please take clear pictures or shoot video of the exception and send it to us.
Q2: How to installation the prop ?
A2: Dear customer, please refer to this method.
Q3: How to calibration the BWhoop B03 and BWhoop B03 Pro ?
A3: Dear customer, please refer to this method.
Q4: How to fine Turning the BWhoop B03 and BWhoop B03 Pro ?
A4: Dear customer, please refer to this method.
Q5:How to judge whether the blade is installed correctly ?