Please insert the USB plug vertically, don't shake it around.
1. Integrated FC & ESC, the lightest amount 4.58g
2. Official Spracing-F3 ,latest BF firmware
3. No Soldering,Easy Installation
4.Silica gel shock absorption pads help filtering MPU noise,makes your flight more stable.
5. Esc each port send continuous 2A, Max 3A output;
6. Whoop Size is easy to install
In general, if the motor is not being badly hit, it's not easy to bulge. However, if the motor is bulgy, you can remediate it by using the following method. Link: Vulnerable Parts of Motor
Dear customer, the weight of the motor is less than 1.9g, which is tiny and frail. Therefore, the blades need special protection when they are installed. Please install it in accordance with the requirement.
Q5:What kind of remote control can be used in different receiver versions ? A5: Dear customer, the user needs to check the remote control instructions. The instructions will show you whether it supports this receiver mode(such as sbus, ppm, etc) or not, and it will show you how to switch to the receiver's mode.
Q6:How to deal with the abnormal binding?
(Aircraft that binding success but can't use remote control is not included) A6: Dear customer, please refer to the following operation:
1. Measure the voltage between GND and 3V3. If the battery is between 3-5V,
it means that it's not the problem of the flight control power supply.
It might be the problem of the receiver, and the receiver needs to be replaced.
2. If the voltage between GND and 3V3 is below 3V or above 5V, the problem is in the fight control and you need to replace the flight control.
The following is the normal performance of binding:
Q7:After the remote control and receiver is binding successful (receiver light and sound is normal), how to deal with the problem of remote control can't control the aircraft or can't control aircraft after reflash the firmware? A7: Dear customer, in general, it's caused by the incorrect flight control terminal parameter adjustment. You need to adjust it in the corresponding receiver mode of Betaflight. You can refer to the 4 kinds of receivers binding of B06 and BF settings(Q8-Q13).
Q8:How to bind and set the B06 XM Receiver?
A8: Dear customer, please refer to video：
Q9:How to bind and set the B06 DSM2 Receiver?
A9: Dear customer, please refer to video：
Q10:How to bind and set the B06 RX2A Receiver?
A10: Dear customer, please refer to video：
Q11:How to bind and set Betaflight the B06 FM800 receiver ?
A11: Dear customer, please refer to video：
Q12:How to operate Betaflight（without receiver setting）?
A12: Dear customer, please refer to video：
Q13: How to update the B06 firmware and reflash the firmware?
A13: Dear customer, please refer to video：
Q14:How to setup the Flight Control USB driver ?
A14: Dear customer, If you can not connect the flight control through the above steps and you can’t see the new COM port, you can try to use these two drive repair tools:
Thanks for Albert Kim’s share, there is a tutorial on the usage of these two tools:
Q15:How to deal with the problem of flight drift of the aircraft ? A15:Dear customer, you need to calibrate it in betaflight, three ways are possible :
1. Setup Calibrate Accelerometer.
2. Enter " gyro_lpf = 188HZ " in CLI, and then save.
3. Please see Joshua Bardwell Whoop calibration video：
by Jason Maillet on April 26, 2018
It's good for practicing and getting used to flight orientation, and I can bring it just about anywhere I go. Perfect size for indoor and around my house flying. Wifi capability, FPV, altitude hold, and one-touch settings set this compact drone apart from cheap "toys".
by Wayne Tahtinen on April 22, 2018
It really a super toy, small, practical and easy well-managed. My children also love it.
by Angela Fattig on April 17, 2018
This is a great product for adults or children like me. From videos and photos are decent for the size of this quad. After receiving the drone,use it can height hold the auto landing work well.
by Michael Buttitta on April 09, 2018
One huge advantage of this quadcopter is that its remote controller is reasonably big, has good precision and easy to use.
But have some cons: due to its robust Alloy shell, the quadcopter is somewhat heavy, which means that there is inertia in movements, and your commands are also smoothened, but it holds altitude quite nicely in comparison with my other drone B 06.
by Jennifer Sigler on April 03, 2018
Excellent service, fast shipping. This one it's super cool I can fly around my house sitting in one place and the cameras pretty good. Deserve to buy it.