Portable indoor & outdoor charging Charge universal 1S
battery 6 battery packs at Once LiPo (4.2V) / LiHv (4.35V) each
port Support USB 5V/2.1A interface Intelligent
Battery Charger： 1. DC XT60 port and DC005 9-17V
provides outdoor and indoor two input charge modes 2. Six ports to charge
separately, each varies from 0.1-1A 3. Each port set LiPo (4.2V) or LiHv
(4.35V) separately 4. Four kinds of battery connectors in each port for 1S
battery Micro PH2.0, MX PH1.25, mCPX 5.PH2.0, JST (convertor) 5. LED and
buzzer indicate charging status provides more safety charging tips to protect
battery 6. USB port (5V/2.1A) for charging iPhone, mobile phones, digital
cameras, etc. 7. Maximum protection: battery reverse polarity protection,
battery over voltage protection and DC input voltage
protection Battery： 1. Brand new and high quality 2. High quality and
rechargeable performance 3. Lightweight, durable, practical and convenient to
use 4. High capacity and long life span 5. Fast charge and discharge rate
for your requirements 6. It is a great battery to power your BWHOOP
Battery Charger： 1. DC Input Voltage: 9.0V
- 17.0V 2. Charge Power Max.: 4.35W x6, ±10% 3. Charge Current: (0.1 -
1.0A) x6, ±10% 4. Battery Type: Lipo/LiHV 5. Battery Cell Count:
1cell 6. Indication: LED light & Buzzer 7. Support Battery Port:
Micro, MX, mCPX, JST(convertor) 8. Support USB Charge Port: 5V/2.0A 9. Net
Weight: 67g 10. Dimensions: 100 x 50 x 22mm Battery： 1. Brand:
BoldClash 2. Type: BWHOOP B05 Spare Parts 3. Battery Capacity: 350
mAh 4. Dimensions: (1.18 x 0.83 x 0.20)" / (3 x 2.1 x 0.5)cm (L x W x
H) 5. Weight: 0.06oz / 1.8g
Charger 5 x 350mAh 25C Battery 1 x TX Male to XT60 Male 3 x Micro to
JST 1 x Battery Ribbon
Any power supply that is similar to B6 RC airplane charger is available to our charger. Our charger uses DC005, with 7-17V/40W input.
Q1:What is the input current for P01 ?
input current：around 2.6-4.5A.
Q2:How to maintain and charge lipo battery in a most proper way?
A2:Dear customer, Please refer to the following:
1. Not charge the battery immediately after using. Let the battery rest for 5 minutes before charging.
2. Do not reverse the positive and negative pole. Ensure the connection is in place and prevent the battery from burning out caused by short circuit.
3. If the battery is expanded, you should replace a new one. Otherwise, it’s easy to cause an explosion.
4. Use voltage buzzer to test the voltage.
If the battery is 3.6V voltage, it shows that it is in the state of over discharge, which is easy to be damaged.
When the battery is not used for a long time, it’s advisable to keep the voltage at 3.8V/ cell.